Buy and pay securely with our SSL gateway using Visa, Mastercard and/or Paypal
Shipments in less than 48 hours by urgent and insured agencies.
Up to 30 days for returns, contact us to resolve any issues.
BMC RACE filter range
Maintaining the same shape as the OEM version With BMC Race filters, the increase in air flow typical of BMC products is taken to a more extreme level. By reducing the layers of cotton from 4 to 3, the air supply is even greater. For this reason, BMC Race filters are recommended exclusively for sports use on the circuit, since the increase in air flow can impoverish the carburetion (more air than necessary) or the injection (the control unit cannot correctly control the stoichiometric mixture). To avoid this problem, it is necessary to reprogram the control unit, which results in a marked increase in performance.
To facilitate their identification, the BMC Race They carry the word «Race» written at the end of the product code and a yellow line on the filter element.
Why choose a BMC air filter?
1. Better airflow to the engine:
The cotton gauze that BMC uses has larger links, which allows for better airflow, but the use of Several layers of cotton soaked in oil block any impurities larger than 7 microns.
2. Higher retention and detection:
BMC air filters achieved an impressive 97.5% filtration efficiency in the ISO5011 test.< /p>
3. Wider filtering area:
Maximum air permeability and greater airflow passage.
< strong>4. The choice of champions:
BMC equips some of the most important teams in Formula 1, MotoGP, WorldSBK.
General information
The cylinder / panel air filter is Commonly referred to as a replacement air filter. Installs into the vehicle's original air box to replace the OEM air filter. Made from high-performance materials that allow for greater airflow combined with more efficient filtration, ensuring all impurities are contained down to just 7 microns (compared to 10 microns for OEMs).
BMC air filters are manufactured using a Full Molding system that allows the characteristic red filter to be made from a single mold without welded joints, thus avoiding The rubber used in BMC air filtration systems has a long life, is very durable and has optimal adhesion characteristics to all forms of airboxes.
BMC filters are made of a multi-layer cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection against gasoline vapors and contamination. oxidation due to humidity in the air.
All BMC air filters are pre-oiled and can be washed and regenerated using the appropriate BMC regeneration kit.
;
Air flow diagram for a sample BMC air filter vs. an OEM paper filter:

< p>Temperature 25 ° C - Humidity 25% - Pressure 1020mbar
The test was carried out with OEM airbox and related airflow restrictions.
This chart is for purely illustrative purposes and does not refer to the actual filter.
p>
How to clean your filter? ¡Take a look at the video!
No customer reviews for the moment.