Professional wheel centerer 10''-21''-b-35n for motorcycle spare parts moped accessories

€232.36

Tax included

Quantity

Out of stock

The BIKE-LIFT B-35N manual motorcycle balancer is a professional steel manual balancer suitable for motorcycle tires with rims up to 21″.

It is equipped with 1 12mm axle. and 2 15-36mm nylon centering cones. to adapt to most motorcycle wheels.

The axle rotates on special bearings, achieving frictionless rotation.

It is delivered disassembled.

< strong>HOW TO USE:

Remove the old weights from the rim (if any)
Insert the axle into the wheel, adjust the cones and Place the entire assembly on the bearings of the balancer.
Place the wheel in the center of the balancer.
Gently rotate the wheel and let it stop.
With the wheel stopped, clean the upper part of the rim (on a clock it would be equivalent to 12 o'clock) and gently (without tightening) glue the counterweights in case it is necessary to remove them to rectify.
Position the wheel. wheel so that the counterweights are at the height of the axle (at 3 o'clock or 9 o'clock), release it and observe: if the wheel goes up, it means there is a lack of weight; If it low, it means that there is excess
Once the balance has been found, secure the counterweights by pressing firmly.

Length (cm) 38.5
Width (cm) ) 17.5
Height (cm)
Weight (kg) 6.7

Brand BIKE LIFT

Reference VM29488

Reviews

No customer reviews for the moment.