Ram x-grip® with u-bracket base half arm brake/clutch-telephones xl for motorcycle spare parts moped accessories

€92.90
Ram x-grip® with u-bracket base half arm brake/clutch-telephones xl for motorcycle spare parts moped accessories
Quantity

  • Buy and pay securely with our SSL gateway using Visa, Mastercard and/or Paypal Buy and pay securely with our SSL gateway using Visa, Mastercard and/or Paypal
  • Shipments in less than 48 hours by urgent and insured agencies. Shipments in less than 48 hours by urgent and insured agencies.
  • Up to 30 days for returns, contact us to resolve any issues. Up to 30 days for returns, contact us to resolve any issues.
PayPal

The RAM-B-174-UN7U has screws for mounting both on brake/clutch reservoirs and on rails from 12.7 to 25.4 mm in diameter, as well as on rails with a diameter of 12.7 to 25.4 mm. as with a short double ball arm and a universal X-Grip® for mobile.

Designed with a patented 2.54 cm diameter RAM rubber ball and head system, with adjustment points at both ends of the double-rotor arm. ;tula; This, by turning the arm knob, allows you to place the X-Grip® in the position you want to have a perfect vision. Hardware accessories for mounting to brake/clutch reservoirs include both standard and metric screws.

The X-Grip® The included device has an elegant and ingenious four-legged design that allows great holding capacity to the mobile phone, without the need to use foam pads or plastics. The X-Grip® It expands and contracts, allowing a perfect fit of the mobile. The perfect complement to the sleek and modern interior of today's vehicles, the RAM X-Grip® It is the evolution of mobile support. The X-Grip® Includes an anchoring device recommended for outdoor applications. The stand is compatible with handheld devices that meet the measurements below.

It is important to verify the measurements of the device plus the case when determining its total measurements.
< br>  

MATERIALS INCLUDED:
(1) Optional anchoring device
(1) tube of glue for rubber caps
(2) hex head screws, M6 x 55  ;mm
(2) hex head screws 1/4-20 x 50.8 mm
(2) hex head screws 1/4-20 x 63.5 mm
(2) spacers 30.48mm
(2) 1/4" spaced lock washers
(1) 1/4-20 U-clamp for 25.4 to 127mm rails
(1) 1/4-20 U-clamp for 25.4 to 31.75mm rails
(2) 1/4-20 Nylock nuts
(2) rubber caps
(1) spacer for U clamp

BRACKET MEASUREMENTS:
Width range: 25.4 to 76.2 mm
Depth range: 22.2 mm max.

CLAMPING RANGE:
Diameters from 12.7 to 31.8 mm

LENGTH FROM PALLET TO PALLET:
119 mm

MEASUREMENTS OF THE BALL/PHONE:
Type B, 2.54 cm diameter (typically used for loads from 0 to 2 kg).

MATERIALS:
Grade aluminum marine
High strength composite
Stainless steel

PACKAGING TYPE:
Polyethylene bag

RAM
VM1104120