Denali D7 LED auxiliary headlight kit with Cansmart Gen II controller for motorcycle spare parts moped accessories

€1,190.71
Tax included
Denali D7 LED auxiliary headlight kit with Cansmart Gen II controller for motorcycle spare parts moped accessories
Quantity
Out of stock

  • Buy and pay securely with our SSL gateway using Visa, Mastercard and/or Paypal Buy and pay securely with our SSL gateway using Visa, Mastercard and/or Paypal
  • Shipments in less than 48 hours by urgent and insured agencies. Shipments in less than 48 hours by urgent and insured agencies.
  • Up to 30 days for returns, contact us to resolve any issues. Up to 30 days for returns, contact us to resolve any issues.
PayPal

DENALI D7 LED auxiliary headlight kit with CANsmart™ GEN II controller.

Kit consists of:

  • (x2) - Headlight DENALI D7 DataDim™ LED auxiliary
  • (x1) - DENALI CANsmart™ GEN II CANBus Controller - KTM

Component description:

1 - DENALI D7 DATADIM™ LED AUXILIARY HEADLIGHT

With more than 7500 lumens, the DENALI D7 light capsule is a of the brightest LED lights under 4.5 inches. The light capsule features seven high-intensity 10-watt LEDs that are focused through patented one-piece optics that were specifically designed to create a full-bodied spot beam that It can reach more than 1200 feet with one lux. The robust heat sink and Active Thermal Management™ They work together to keep this high-powered lamp cool enough to maintain maximum light output when you need it most.

Are you still not convinced? Is this light bright enough? A D7 pod will outshine seven D2 lights and produces more than double the light output of our beastly D4 light pod.

Choose to add an additional set of amber or selective yellow lenses for greater performance in adverse weather conditions or to make your vehicle significantly more visible to other motorists on the road! 

D7 Capsule Features

  • Standard high-intensity Cree LED with 7665 lumen output menus per pair
  • The TriOptic ™ multibeam lens system; includes a Spot, Flood and Hybrid beam option in a pair of capsules
  • DataDim™ allow plug and play connection and integrated dimming with DENALI lighting and dimming controllers.
  • DrySeal™ can withstand the most extreme environments
  • Impact PC™ They won't crack, fade or corrode like traditional aluminum bezels
  • LiveActive™ Thermal Management keeps LEDs cool by preventing loss of light output due to overheating
  • Low profile mounting bracket with stainless steel hardware included
  • Additional pair included of E-Mark approved flood lenses
  • Interchangeable lenses available in clear, amber and selective yellow

D7 pod specifications ( par)

  • LED: (14x) 10 watts Cree XPL HI
  • Power consumption: 10 amps
  • Lú ;Raw Menus: 15330
  • Beam Distance: 1505 feet
  • Beam Width: 200 feet
  • DataDim™ Compatible: Yes< /li>
  • Operating Voltage: 12 VDC
  • Sheath Size: 4.4 round x 2.9 deep
  • Sheath Weight: 1.8 lbs li>
  • IP67 waterproof and submersible
  • E Mark approved spot lens

What's in the capsule box D7 light - DNL.D7.050

  • (1x) LED light capsules
  • (1x) Hinge brackets with hardware stainless steel M8
  • (1x) flexible cable

2 - DENALI CANSMART™ GEN II CANBUS CONTROLLER - KTM

< p>Take advantage of the flexibility and intelligence of your KTM motorcycle's CAN bus electrical system to dramatically facilitate accessory installation with the new and improved DENALI CANsmart™ Controller GEN II.

The CANsmart™ DENALI offers plug-n-play installation and integrated control of up to four accessories to allow dozens of customizable configurations that can be controlled directly from the KTM's existing handlebar switches, the optional KTM CANsmart Control Switch or the CANsmart™ accessory manager software.

CANsmart's four circuits are pre-programmed to independently connect and control two sets of DENALI lights, a SoundBomb horn, and our B6 auxiliary brake light. p>

Gen II: more features, more power, more versatile

Unlike the Gen I CANsmart, the four circuits of the Gen II can provide 10 amps full of continuous power and each circuit can be configured to run any type of accessory. Maximum power consumption for the entire unit remains at 30 amps continuous. The Gen II also features two new auxiliary light configurations. You can now modulate your auxiliary lights for greater visibility and set the left and right side lights to cancel independently when you activate their corresponding turn signal.

Features

  • KTM Dongle Functionality* - Enables additional features in the ABS control unit and ECU and remembers settings eliminating the need for Reset ABS and MTC every time you restart the bike. Additionally, it enables the 80 Octane Bad Fuel feature, which reduces engine power for trips with lower fuel quality.
  • High/Low Timing  ;- Set the auxiliary lamps to switch between a programmable high/low setting with the factory high beam switch.
  • ON/OFF and dimmed - Independently control two sets of ON/OFF lights directly from your vehicle's original switches. Brightness can be adjusted using software or the optional control switch.
  • modular lights- Set the auxiliary lights to modulate to increase your visibility to other motorists.< /li>
  • Flash to pass - Need to get someone's attention? Press the high beam switch three times and the auxiliary lights will flash three times faster.
  • Cancel with turn signal*  - This feature cancels the corresponding auxiliary light when you turn on your turn signal, preventing powerful auxiliary lights from overpowering your signal.
  • Hazardous Reverse Flashing*  - This feature flashes the auxiliary lights in reverse of the emergency lights, increasing visibility during roadside emergencies.
  • Horn Installation Plug & Play - Quickly and easily connect high-power replacement speakers like our SoundBomb™ without having to add a relay harness additional.
  • Strobe light with horn* - With this function selected, the CANsmart™ will turn on The auxiliary lights will automatically turn on when the horn sounds. This feature works whether you have the factory horn or the SoundBomb® horn installed.
  • Deceleration Activated Smart Brake Technology*- CANsmart™ Reads vehicle speed in real time to activate the auxiliary brake light during deceleration before you even hit the brake. You can adjust the sensitivity and the minimum speed at which the alarm will be activated. The Smart Brake function.
  • Intermittent pattern braking* - The CANsmart™ Provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set the auxiliary brake lights to flash only when braking hard, flash continuously when the brake is applied, or flash four times quickly and then stay steady (California legal flashing speed). < li>
Circuit Function Selector - The Circuit Function Selector in the CANsmart software will allow you to Run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the menu. drop-down menu and make your selection from the list of available circuit functions. Switching Power Supply - The CANsmart™ provides a universal accessory option that simply gives you clean 12V switched power. That means any accessory you plug into this circuit will turn on automatically. and it will turn off with its ignition. Delay Timeout - You can also configure the accessories in this circuit to have a delayed timeout. This will keep them - The accessory circuit option is ideal for powering your GPS, phone , thermal equipment or any other electronic device.

What? What's in the box?

  • CANsmart® Controller
  • (x2) 5.5 ft. Light Extension Cables
  • Cable 5 Foot SoundBomb Horn Extension Cable
  • B6 Brake Light Wiring Adapter
  • Ties
  • Adhesive Velcro Closure
  • Micro USB programming cable

*NOTE:

  1. KTM 790 series motorcycles use a different ECU and are only partially compatible. Turn signal, heated equipment, horn and KTM dongle functions are not available for 790 models, but control of auxiliary lighting, brake lights and other accessories is supported.  Brake light functions are only activated by the front brake on 790 models.
  2. The 80 octane Bad Fuel function is only available on 790 models. available for Adventure models through model year 2016.  3. OEM OFFROAD PACKAGE (p/n 60600980000) is also required for the 1050/1090 ADVENTURE to use the functions of the dongle.
  3. We recommend adding a B6 wiring extension DNL.WHS.049 if you plan to install a B6 on the KTM 790

Type LED light
Packaging of 3
Color Black
Width (mm) 121mm
Length (mm) 74
Approval Not approved in Switzerland
Position Front
Aluminum Composition
Diameter Ø (mm) 114mm
DENALI
VM3064552

Reviews

No customer reviews for the moment.

Write your review

Denali D7 LED auxiliary headlight kit with Cansmart Gen II controller for motorcycle spare parts moped accessories

Denali D7 LED auxiliary headlight kit with Cansmart Gen II controller for motorcycle spare parts moped accessories

Write your review