DENALI D4 LED auxiliary headlight kit with CANsmart™ GEN II controller.
Kit consists of:
- (x2) - Headlight DENALI D4 DataDim™ LED auxiliary
- (x1) - DENALI CANsmart™ GEN II CANBus Controller - Harley-Davidson Pan America 1250
Component description :
1 - DENALI D4 DATADIM™ LED AUXILIARY HEADLIGHT
Simply put; The DENALI D4 is a beast. It is DENALI's most powerful light with an output of 4380 lumens in an aggressively styled housing. The installed hybrid lens is Equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close range flood and penetrating spot beam in a housing. The included spot lens throws a huge beam of light and has an official E-Mark certification.
D4 Capsule Features
< ul> High-intensity series Cree LEDs with 4380 lumen output per capsule DrySeal™ can withstand the most extreme environments LiveActive™ Thermal Management keeps LEDs cool by preventing loss of light output due to overheating Low profile mounting bracket with stainless steel hardware included Includes flood lens. Additional E-Mark approved lens Amber lenses available (sold separately) DNL.D4.10100
D4 Pod Specifications< /strong>
- LED: (4x) 10 Watt Cree : 4380
- DataDim® Compatible: Yes
- Operating Voltage: 12 VDC
- Pod Size: 3.9 square x 2.6 deepWeight< /li>
- Sheath: 1.55 lbs
- IP67 Waterproof and Submersible
- E-Mark Approved Spot Lens
D4 Pod - What What's in the box?
- (1x) LED light capsules
- (1x) True-Hybrid™ (installed)
- (1x) E-Mark approved spot lenses (included)
- (1x) Hinge brackets with M8 stainless steel hardware
- ( 1x) Wiring pigtail
2 - DENALI CANSMART™ GEN II CANBUS CONTROLLER - HARLEY-DAVIDSON PAN AMERICA 1250
The innovative CANbus controller Harley-Davidson provides a plug & play and intelligent control of genuine Harley-Davidson aftermarket and accessories directly from your motorcycle's original switches or DENALI accessory management software. Simply connect the CANsmart™ Tap your Harley-Davidson diagnostic port to access more than 35 programmable accessory settings that provide intelligent control of auxiliary lights, horns, brake lights, or any other accessory you can think of. All four accessory circuits are electronically fused and can provide up to 25 amps peak (10 amps continuous).
Features
- High/Low Sync- Set the low beam and auxiliary lamps to cycle between a programmable high/low setting with the factory high beam switch.
- ON/OFF and Dimming - Independently control two sets of lights ON/OFF and change the intensity level (for both day and night) directly from the switch factory trip of your motorcycle. Click three times to turn the lights on/off, or press and hold for 3 seconds to enter dimming mode where you can toggle between 10% and 100% intensity.
- modular lights - Set your passing lights or auxiliary lights to modulate to increase your visibility to other motorists.
Flash to pass- Need to get someone's attention? Press the high beam switch three times and the auxiliary lights will flash three times as fast. - Cancel with turn signal- This This feature cancels the corresponding auxiliary light when you turn on your turn signal, preventing powerful auxiliary lights from overpowering your signal.
- Flash with turn signal - This feature flashes the corresponding auxiliary light when you turn on the turn signal, allowing the auxiliary lights to function as turn signals.
- Installation Plug & Play - Quickly and easily connect high-power replacement speakers like our SoundBomb™ without having to add a relay harness additional.
- Strobe light with horn - With this function selected, the CANsmart™ will turn on Automatically switch on dipped beam headlights or auxiliary headlights when you sound the horn. This feature works whether you have the factory horn or the SoundBomb® horn installed.
- Deceleration Activated Smart Brake Technology - CANsmart™ ; Reads vehicle speed in real time to activate the auxiliary brake light during deceleration before you even hit the brake. You can adjust the sensitivity and the minimum speed at which the alarm will be activated. The Smart Brake function.
- Intermittent pattern braking- The CANsmart™ Provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set the auxiliary brake lights to flash only when braking hard, flash continuously when the brake is applied, or flash four times quickly and then stay steady (California legal flashing speed). < li>
Switching Power Supply- The CANsmart™ provides a universal accessory option that simply gives you clean 12V switched power. That means any accessory you plug into this circuit will turn on automatically. and it will turn off with its ignition.
Delay Timeout - You can also configure the accessories in this circuit to have a delayed timeout. This will keep them on up to 30 seconds after turning off the motorcycle.
On-Board Power - The accessory circuit option is ideal for powering your GPS, phone , thermal equipment or any other electronic device.
What? What's in the box?
- CANsmart® Controller
- (x2) 5.5 ft. Light Extension Cables
- Cable 5 Foot SoundBomb Horn Extension Cable
- B6 Brake Light Wiring Adapter
- Ties
- Adhesive Velcro Closure
- Micro USB programming cable
Type of LED light
Packaging of 3
Color Black
Width (mm) 99mm
Length (mm) 65mm
Homologation Not approved in Switzerland
Front Position
Aluminum Composition