Denali D3 LED auxiliary headlight kit with Cansmart Gen II controller for motorcycle spare parts moped accessories

€834.13
Tax included
Denali D3 LED auxiliary headlight kit with Cansmart Gen II controller for motorcycle spare parts moped accessories
Quantity

  • Buy and pay securely with our SSL gateway using Visa, Mastercard and/or Paypal Buy and pay securely with our SSL gateway using Visa, Mastercard and/or Paypal
  • Shipments in less than 48 hours by urgent and insured agencies. Shipments in less than 48 hours by urgent and insured agencies.
  • Up to 30 days for returns, contact us to resolve any issues. Up to 30 days for returns, contact us to resolve any issues.
PayPal

DENALI D3 LED auxiliary headlight kit with CANsmart™ GEN II controller.

Kit consists of:

  • (x2) - Headlight DENALI D3 TriOptic™ DataDim™ LED auxiliary
  • (x1) - DENALI CANsmart™ GEN II CANBus controller - BMW R1200LC / R1250

Component description :

1 - DENALI D3 TRIOPTIC™ DATADIM™ LED AUXILIARY HEADLIGHT

Our new D3 LED lights are based on a decade of DENALI innovation to deliver the highest performing 36 watt legal driving light on the market. Our D3 driving light features our exclusive TriOptic® beam system. which includes a bulb and a hybrid driving lens with each light capsule. Unlike TriOptic™ As above, the D3 Hybrid High Beam is ECE and SAE Compliant to deliver impressive street-legal high beam in North America and European Union countries. But what What if you don't care about street legal precision and just want an outrageous off-roader? We've got you covered too! The D3 dot lens was designed for a maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36 watt light comes close. The spot beam is so impressive that it actually outperforms top-tier competitors' lights that are twice its size.

Choose to add an additional set of amber or yellow lenses Selective measures to achieve greater performance in adverse weather conditions or to make your vehicle significantly more visible to other motorists on the road! Available with an SAE and ECE certified fog beam for drivers looking for a truly street legal fog beam that is super wide and has a sharp horizontal cut. BUY D3 TOOTH

Features

  • TriOptic™ lens system; (includes spot and hybrid lenses with each module)
  • Best street legal hybrid and spot beams in its class (SAE/DOT and ECE certified)< /li>
  • High intensity series Cree LEDs with an output of 2100 lumens per capsule
  • DataDim® 3-wire intelligent dimming technology; (compatible with all DENALI dimming drivers)
  • The DrySeal™ can withstand the most extreme environments
  • Impact PC™ They won't crack, fade or corrode like traditional aluminum bezels.
  • LiveActive™ Thermal Management keeps LEDs cool by preventing loss of light output due to overheating
  • Low profile mounting bracket with stainless steel hardware included
  • Driving lenses included ;n additional SAE/DOT and ECE certified hybrids (spot lens installed)
  • Amber and selective yellow lenses available

Performance beam width (pair)

  • Spot beam
  • Beam distance (at 1 lux): 1910 feet (582 meters)
  • Beam width (at 1 lux): 100 feet (30 meters)
  • Combined beam (1 spot, 1 hybrid)
  • Beam distance beam (at 1 lux): 1520 feet (463 meters)
  • Beam width (at 1 lux): 175 feet (53 meters)
  • Hybrid Beam
  • Beam Distance (at 1 lux): 1050 feet (320 meters)
  • Beam Width (at 1 lux): 225 feet (69 meters)

Specifications (single capsule)

  • Pod size: 3 .5 (90mm) round x 2.62 (66mm) deep
  • LED: (3x) 11 Watt Cree XP-P LED
  • Drawing Power:  36 Watts (3 Amps)
  • Lumens: 2100
  • DataDim™ Compatible: Yes
  • Operating Voltage: 9-32V CC
  • IP67 waterproof and submersible
  • Hybrid lens certifications: SAE/DOT J581 and ECE R112
  • Spot lens certifications: ECE R112

Contents of the light capsule box - DNL.D3.050

  • (1x) Mo ;D3 LED light module (spot lens installed)
  • (1x) D3 hybrid lens
  • (1x) Hinge brackets with M8 stainless steel hardware < li>(1x) Wiring pigtail

2 - DENALI CANSMART™ GEN II CANBUS CONTROLLER - BMW R1200LC / R1250

Take advantage of flexibility and the intelligence of your BMW motorcycle's CAN bus electrical system to dramatically facilitate accessory installation with the new and improved DENALI CANsmart™ GEN II.

The CANsmart™ DENALI offers plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable configurations that can be controlled directly from BMW WonderWheel or CANsmart® accessory management software.

Cansmart's four circuits are pre-programmed to independently connect and control two DENALI 2.0 light assemblies, a SoundBomb horn, and our B6 auxiliary brake light.

Gen II: More s features, more power, more versatile

Unlike the Gen I CANsmart, the four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any type of accessory. Maximum power consumption for the entire unit remains at 30 amps continuous. The Gen II also features two new auxiliary light configurations. You can now modulate your auxiliary lights for greater visibility and set the left and right side lights to cancel independently when you activate their corresponding turn signal.

Features

  • High/Low Sync - Set the auxiliary lights to switch between a programmable high/low setting with the easy high beam switch. ;factory.
  • ON/OFF and dimming - Independently control two sets of lights ON/OFF and change the intensity level (for both day and night). for night) directly from your original vehicle switches.
  • modular lights - Set the auxiliary lights to modulate to increase your visibility to other motorists. li>
  • Flash to pass - Need to get someone's attention? Press the high beam switch three times and the auxiliary lights will flash three times faster.
  • Cancel with turn signal - This feature cancels the corresponding auxiliary light when you turn on your turn signal, preventing powerful auxiliary lights from overpowering your signal.
  • Hazardous Reverse Flashing  - This feature flashes the auxiliary lights in reverse of the emergency lights, increasing visibility during roadside emergencies.
  • Plug & Horn Installation ; Play - Quickly and easily connect high-power replacement speakers like our SoundBomb™ without having to add a relay harness additional.
  • Strobe light with horn - With this function selected, the CANsmart™ will turn on The auxiliary lights will automatically turn on when the horn sounds. This feature works whether you have the factory horn or the SoundBomb™ horn installed.
    Deceleration Activated Smart Brake Technology - CANsmart™ Reads vehicle speed in real time to activate the auxiliary brake light during deceleration before you even hit the brake. You can adjust the sensitivity and the minimum speed at which the alarm will be activated. The Smart Brake function.
  • Intermittent pattern braking - The CANsmart™ Provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set the auxiliary brake lights to flash only when braking hard, flash continuously when the brake is applied, or flash four times quickly and then stay steady (California legal flashing speed). < li>
Circuit Function Selector - The Circuit Function Selector in the CANsmart software will allow you to Run any accessory of your choice on any of the four circuits. Click a circuit icon to open the menu. drop-down menu and make your selection from the list of available circuit functions. Switching Power Supply - The CANsmart™ provides a universal accessory option that simply gives you clean 12V switched power. That means any accessory you plug into this circuit will turn on automatically. and it will turn off with its ignition. Delay Timeout - You can also configure the accessories in this circuit to have a delayed timeout. This will keep them on up to 30 seconds after turning off the motorcycle. On-Board Power - The accessory circuit option is ideal for powering your GPS, phone , thermal equipment or any other electronic device.

What? What's in the box?

  • CANsmart® Controller
  • (x2) 5.5 ft. Light Extension Cables
  • Cable 5 Foot SoundBomb Horn Extension Cable
  • B6 Brake Light Wiring Adapter
  • Ties
  • Adhesive Velcro Closure
  • Micro USB programming cable

Type of LED light
Packaging of 3
Color Black
Width (mm)
Length (mm)
Approval CE Approval
Front Position
Aluminum Composition
Diameter Ø (mm) 90mm
DENALI
VM3064506

Reviews

No customer reviews for the moment.

Write your review

Denali D3 LED auxiliary headlight kit with Cansmart Gen II controller for motorcycle spare parts moped accessories

Denali D3 LED auxiliary headlight kit with Cansmart Gen II controller for motorcycle spare parts moped accessories

Write your review