Denali D7 LED auxiliary headlight kit with wiring and dialdim controller for motorcycle spare parts moped accessories

€1,335.71
Denali D7 LED auxiliary headlight kit with wiring and dialdim controller for motorcycle spare parts moped accessories
Quantity
Out of stock

  • Buy and pay securely with our SSL gateway using Visa, Mastercard and/or Paypal Buy and pay securely with our SSL gateway using Visa, Mastercard and/or Paypal
  • Shipments in less than 48 hours by urgent and insured agencies. Shipments in less than 48 hours by urgent and insured agencies.
  • Up to 30 days for returns, contact us to resolve any issues. Up to 30 days for returns, contact us to resolve any issues.
PayPal

DENALI D7 LED auxiliary headlight kit with wiring and DialDim™ controller.

Kit consists of:

  • (x2) - Headlight DENALI D7 DataDim™ LED Auxiliary
  • (x1) - DENALI DialDim™ Lighting Controller
  • (x1) - DENALI DialDim™ Plug & Play Wiring Adapter - Honda Africa Twin 1100
  • li>

Component description:

1 - DENALI D7 DATADIM™ LED AUXILIARY HEADLIGHT

< p>With over 7500 lumens, the DENALI D7 light pod is one of the brightest LED lights under 4.5 inches. The light capsule features seven high-intensity 10-watt LEDs that are focused through patented one-piece optics that were specifically designed to create a full-bodied spot beam that It can reach more than 1200 feet with one lux. The robust heat sink and Active Thermal Management™ They work together to keep this high-powered lamp cool enough to maintain maximum light output when you need it most.

Still not convinced Is this light bright enough? A D7 pod will outshine seven D2 lights and produces more than double the light output of our beastly D4 light pod.

Choose to add an additional set of amber or selective yellow lenses for greater performance in adverse weather conditions or to make your vehicle significantly more visible to other motorists on the road! 

D7 Capsule Features

  • Standard high-intensity Cree LED with 7665 lumen output menus per pair
  • The TriOptic ™ multibeam lens system; includes a Spot, Flood and Hybrid beam option in a pair of pods
  • DataDim™ allow plug and play connection and integrated dimming with DENALI lighting and dimming controllers.
  • DrySeal™ can withstand the most extreme environments
  • Impact PC™ They won't crack, fade or corrode like traditional aluminum bezels
  • LiveActive™ Thermal Management keeps LEDs cool by preventing loss of light output due to overheating
  • Low profile mounting bracket with stainless steel hardware included
  • Additional pair included of E-Mark approved flood lenses
  • Interchangeable lenses available in clear, amber and selective yellow

D7 pod specifications ( par)

  • LED: (14x) 10 watts Cree XPL HI
  • Power consumption: 10 amps
  • Lú ;Gross Menus: 15330
  • Beam Distance: 1505 feet
  • Beam Width: 200 feet
  • DataDim™ Compatible: Yes < /li>
  • Operating Voltage: 12 VDC
  • Sheath Size: 4.4 round x 2.9 deep
  • Sheath Weight: 1.8 lbs li>
  • IP67 waterproof and submersible
  • E Mark approved spot lens

What's in the capsule box D7 light - DNL.D7.050

  • (1x) LED light capsules 
  • (1x) Hinge brackets with hardware stainless steel M8
  • (1x) flexible cable

2 - DENALI DIALDIM™ LIGHTING CONTROLLER

Our innovative DialDim® lighting controller Features a multi-color halo dimmer switch that allows you to independently turn on/off and dim two sets of 3-wire auxiliary lights from a single consolidated wiring harness. The LED halo switch shows your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; Simply double-click to switch between the two circuits.

The controller also features high beam, turn signal and horn inputs to unlock smart flash functions that can override your auxiliary lights with your turn signal, turn on your auxiliary lights as a turn signal, or turn on your lights when your horn sounds.

More features, more feedback!< /strong>

Our patent-pending multi-color halo dimmer switch can do much more than just turn your lights on and off and dim them. For starters, it shows the exact intensity of both lights so you never have to guess if the lights are on or in what state. intensity are set.

With electronically fused circuits, the halo switch can also display and allow you to select fuse values for each circuit. And if a fuse blows, the LED halo will turn dark. Red will provide real-time feedback and will allow reset the fuse.

Last but not least, the halo switch also functions as a battery monitor with a low voltage cut-off function. Our industry-first design will flash brightly. It will turn on in different colors when turned on to show the battery status and will turn off. Automatically turns on auxiliary lights if the battery voltage drops below 10.8 volts.

Both the controller housing and switch feature a fully waterproof design with gaskets and O-rings at each joint to ensure trouble-free operation in outdoor environments.

Features

  • < li>
ON/OFF and Dimming - Independently control the on/off of two sets of lights and the intensity level with the single DialDim™ switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.High/Low Sync- Your auxiliary lights will automatically switch between the dim setting selected and maximum intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle's high beam circuit to enable this feature.Stealth Mode - A smart setup The 0% dimming setting on the switch allows the lights to be off during normal driving conditions, but will increase to 100% intensity with your vehicle's high beam switch. The lights will also react to turn signal and horn inputs in this mode, but will remain off when no inputs are detected. Cancel with signal of turning - When it is When enabled, the headlights (blue circuit 1) will be canceled in sync with your signal to avoid washing your factory turn signal. Simply connect the yellow and orange input wires to your vehicle's turn signal circuit to enable this feature.Flash as turn signal  - When it is When enabled, the amber visibility lights (green circuit 2) will flash in sync with the factory turn signals. Simply connect the yellow and orange input wires to your vehicle's turn signal circuit to enable this feature.Strobe Light with Horn  ;- When it is When enabled, the auxiliary lights on both circuits will flash at 4Hz when the horn sounds. Simply connect the green input wire to your vehicle's horn circuit to enable this feature.Electronically Fused Circuits - ¡ Both light circuits are electronically fused and can be configured directly from the switch itself! The halo will light up It will turn red to notify you when a fused circuit is tripped.Voltage display indicator- When starting the vehicle, the switch halo will flash. ; It is green to indicate that the battery voltage is low. is in good condition or will flash It turns red to indicate that the battery voltage is low. below 11.8V.Low Voltage Cut-Off - If the battery voltage drops below 10.8V, the lights They will not turn on, which will prevent let him be stranded. The switch halo will flash. 4 red LEDs to indicate low voltage condition.

*To enable functions related to high beam, turn signal and horn, you must connect to a clean 12v circuit in your vehicle. To disable these features, simply do not connect to the corresponding vehicle circuit.

Product Specifications

  • Two light circuits completely independent.
  • Eight intensity levels per circuit (5%, 15%, 30%, 45%, 60%, 75%, 100%)
  • Eight values of electronic fuses. Single (1A, 2A, 4A, 6A, 8A, 10A, 15A, 20A)
  • Five feature input wires (power, high beam, horn, left turn, right turn )
  • 20 A max. per circuit (30 Amps max combined)
  • Operating Voltage: 12 VDC

What? What's in the box?

  • (1x) DialDim™ controller harness
  • (1x) DialDim™ multifunction switch< li>(1x) 7/8 Handlebar Switch Mount
  • (4x) 66' Plug-&-Play Light Extensions
  • (1x) Wire Harness of the universal input trigger

3 - DENALI DIALDIM™ PLUG & PLAY WIRING ADAPTER - HONDA AFRICA TWIN 1100

This wiring adapter Allows plug-and-play connection between our standard DialDim lighting controller and the Honda Africa Twin 1100. To install, simply connect the white connector to our DialDim controller and the remaining connectors in-line to the headlight, horn and turn signal connectors.


Type of light LED
Packaging of 4
Color Black
Width (mm) 121mm
Length (mm) ) 74.2mm
Approval Not approved in Switzerland
Front Position
Aluminum Composition
Diameter Ø (mm)
DENALI
VM3064480