UNIVERSAL terminal cable with two output lines: K and L. NOTE: This terminal (which must be connected to the main cable 3151/AP01), is used to connect to specific systems or to particular diagnostic sockets. In order to carry out communication, it is necessary to connect a specific tip to an output line of the terminal (normally K) that will be connected to a specific pin of the vehicle socket. The output line, the tip to be used and the socket pin to connect to are displayed in the diagnostic software. The use of this combination is widespread in blink-code diagnoses where it is necessary to establish communication with the control unit. *To be used in combination with cable 3151/AP01